Fire Alarm Bell
Fire alarm bell has been around since 1852. It’s been saving lives and exasperating building occupants with inconvenient drills. Today fire alarm systems are required in all public buildings, such as schools, offices, hotels, warehouses, libraries and courthouses, for their capacity to educate rapidly a lot of individuals of imposing danger.
Features
| 18AWGwireleads |
| ANSI/UL Listed for outdoor use when used with the BB-WP weatherproof back box |
| UL Listed |
| Available in 6" or 10" version |
| Mounts to a standard 4" square electrical box |
| Meets ANSI/UL 464 requirements |
| Red metal finish |
| High dbA output |
Approvals:
Manual Pull Station
Pemall’s Weatherproof Manual Pull Station is a UL Listed fire alarm manual initiating device. It is suitable for applications requiring outdoor mounting where it may be subject to wet conditions. The product is pre-painted and have plated surface to avoid corrosion. It is a high quality pull station made out of non toxic materials with rounded edges to fit most design requirements. Pemall’s Weatherproof Manual Pull Station have a lot variety of features, which makes it ideal for factories, flour mills, oil refineries, mines, data centers and many other applications both for indoor and/or outdoor.
FEATURES
| Corrosion-resistant construction |
| Rugged die-cast aluminum housing and backbox |
| 10A, 120 VAC Contacts |
| Lift and Latching pull-down lever |
| Screw terminal connections |
| Key Reset |
| Neoprene Sealing Gasket |
| Enclosed Switch with Glass Rod (Included) |
Approvals:
Outdoor Evacuation Signal
The Outdoor Evacuation Signal shall produce a peak sound output of 100dBA or greater at as measured in an anechoic chamber and shall also have the capability to silence the audible signal while leaving the visible signal energized with the use of a single pair of power wires.
Approvals:
FEATURES
| Nominal voltage 24 VDC |
| Fixed 75 candela |
| Prewire entire system, install mounting bracket, then install signals |
| Input terminals accept 12 to 18 AWG |
| Horn/strobe switch selection for high or low dBA |
| Horn/strobe switch for 2400 Hz, mechanical, chime and whoop tones |
| Silence audible while visual appliance will remain flashing |
| Tamperproof re-entrant grill and locking screw (optional use) |
| Wall mount |
Evacuate Strobe Light Box
The Evacuate Strobe Light Box is used as the primary caution or warning before the release of the fire suppression system. The strobe light box is made of electrogalvanized steel sheet and is epoxy powder covered.
Approvals:
FEATURES
| Dimension: 265mm(L) x 105mm(W) x 110mm(H) |
| Durable - Tough industrial design constructed with mild steel |
| Luminary: Ultra Bright LED |
| Easy visible access from side and rear |
| Injection-molded, VO flame retardant, high impact housing |
| Charge rate / power on LED indicator light |
| Long life, energy saving LED lamps |
| Listed for damp location |
| Surface Wall Mount |
| Universal mounting canopy for top or side installation |
Gas Discharged Strobe Light Box
The Gas Discharged Strobe Light Box is utilized as the second caution. It releases a signal that means a fire extinguishing system is in operation. The strobe light box is made of electro galvanized steel sheet and is epoxy powder covered.
Approvals:
FEATURES
| Dimension: 265mm(L) x 105mm(W) x 110mm(H) |
| Led Energy savings |
| Damp location rated |
| Universal canopy included |
| Spec grade cast aluminum |
| Universal knock-out chevrons |
| Push-to-test switch |
| Charge rate / power on LED indicator light |
| Durable black powder coated finish |
| Fixture is single or double sided |
PEMALL USA works with many Global and International certification bodies. The logos shown on the website are to display our association with the respective certification bodies. For Product certifications, please visit the respective product page or contact our sales team.